724.587.3763

SARE Grants:
Farmer Built Compost Turner
Farmer Built Spelt Dehuller

 

Compost Turner

Compost is the cornerstone of nutrient management in a organic environment.

The object of this grant was to design a compost turner that could be built by a farmer that has a hydrostatic drive allowing the turner to be used with an older tractor. This turner took ~ 300 hours and $12,500 of materials to build. A comparable commercially available turner with a hydrostatic pusher option would cost over $30,000.

A construction manual for this project is available:  Please click here.

Plans for the compost turner in PDF format are on-line on the SARE website.

Spelt Dehuller

Spelt and other ancient grains, which do not dehull when they are combined, are gaining popularity. There are commercially available spelt dehullers, however the cost of them and their ancillary equipment means a farmer would have to raise over 100 acres of spelt annually to justify their purchase.

The objective of this grant was to build a small spelt dehuller that would allow a small farmer to dehull his spelt and emmer. The goal was to create a dehuller that would dehull 30-50% of the grain per pass. (The actual dehulling rate in my test runs ranged from 86.4 to 91.8 %.) The machine would also have a simple aspirator to remove the hulls after the grain and hulls left the dehulling chamber.This turner took ~ 215 hours and $13,000 of materials to build. A comparable commercially available dehuller would cost over $45,000.

A construction manual for this project is available:  Please click here.

Plans for the spelt dehuller in PDF format are on-line on the SARE website.


CAD Drawings

CAD drawings for these projects are available.  To read the drawing files, you will need to download a CAD reader, which can be downloaded here.

To access the CAD drawings:  Please send a memory stick with a postage paid return envelope to me and I will copy the files and return it to you.

Nigel Tudor
Weatherbury Farm
1061 Sugar Run Road
Avella PA 15312

If you have any questions, please email me.